China's Custom Cosmetic Packaging Provider Since 2005

Sign In Contact

Bottles & Jars

Cosmetic Bottles and Jars, with Their Published Dimensions

Spray, lotion, foam, airless, dropper, pump and squeeze bottles, cream jars and tubes — 514 formats from the product catalogue of a manufacturing partner, with the capacity, neck, overall size and weight figures that catalogue prints for each one. None of it is stock: every format is made to order, and capacity and dimensions are re-confirmed against your formula and fill weight before tooling.

Product groups	169 — spray bottles, lotion bottles, foam bottles, bottles, dropper bottles, cream jars, pump bottles, squeeze bottles and more
Formats	514 across 169 plates
Capacity	5 – 800 ml · 3 – 330 g (cream jars, measured by weight)
Neck	Printed per format; 12 – 85 mm across the range we can read
Materials	ABS, HDPE, LDPE, PE, PET, PETG, PP
Table columns	They vary by plate, because the source catalogue's do — a plate that prints no bottle weight has no bottle-weight column here rather than a column of dashes
Decoration	Spray coating, silk-screen printing, hot stamping, plating, labeling and texture finishes
Order quantity	Confirmed per project — it depends on the format, the tooling and the decoration
Sampling	Available. Formats already in tooling sample fastest; a custom prototype follows design approval

Applications beyond the cosmetic category

The columns on this page are capacity, neck, overall size and weight - the figures a filler needs in order to match a container to a closure and a fill line. None of them is defined by the product inside it.

The neck figure is the one that travels furthest. It is printed per format across 12 - 85 mm, so if you are bringing your own closure - a pump, a dropper, a dispensing cap, a metered insert - the neck column is where that conversation starts, whatever the product is.

What we are not is a regulatory partner. We hold no pharmaceutical, medical-device or management-system certification, and we do not issue biocompatibility, extractables or leachables documentation. Whether a format suits a regulated product, and what testing that requires, follows from your formulation and your regulatory route - and those answers come from the material suppliers and the testing laboratories, not from a packaging supplier's own declaration. If that puts work on your side, it is work that was always yours; a container supplier who offers to close it for you is offering a document, not a result.

PETG Lotion Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 105 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 105PETG Lotion Bottles

4 formats · 200–500 ml

PETG Lotion Bottles: published dimensions
Format	Capacity	Material	Neck	Overall size	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Lotion Bottle 01	200 ml	PETG	24 mm		111.4 / 128.2 mm	40 g ±2		Enquire
Lotion Bottle 02	300 ml	PETG	24 mm		125 / 142.6 mm	45 g ±2	58 g	Enquire
Lotion Bottle 03	400 ml	PETG	28 mm	76.2 × 40.4 × 191.6 mm	149.7 / 167.8 mm	58 g ±2	71 g	Enquire
Lotion Bottle 04	500 ml	PETG	28 mm	79.9 × 40.6 × 215.3 mm	173.5 / 190.9 mm	72 g ±2	85 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

PETG Lotion Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 106 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 106PETG Lotion Bottles

3 formats · 200–400 ml

PETG Lotion Bottles: published dimensions
Format	Capacity	Material	Neck	Overall size	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Lotion Bottle 01	200 ml	PETG	24 mm	68.8 × 45.3 × 122.9 mm	82.7 / 98.8 mm	40 g ±2	52.5 g	Enquire
Lotion Bottle 02	300 ml	PETG	24 mm	68.8 × 44.8 × 158.4 mm	118.2 / 135 mm	50 g ±2	52.5 g	Enquire
Lotion Bottle 03	400 ml	PETG	24 mm	68.8 × 44.8 × 192.5 mm	153 / 169.6 mm	60 g ±2	72.5 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

PETG Lotion Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 107 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 107PETG Lotion Bottles

2 formats · 200–300 ml

PETG Lotion Bottles: published dimensions
Format	Capacity	Material	Neck	Overall size	Bottle weight	Weight, filled	Enquiry
Lotion Bottle 01	200 ml	PETG	28 mm		33 g ±2	49 g	Enquire
Lotion Bottle 02	300 ml	PETG		76.4 × 107 mm	45 g ±2	59.2 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

PETG Lotion Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 108 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 108PETG Lotion Bottles

2 formats · 200–300 ml

PETG Lotion Bottles: published dimensions
Format	Capacity	Material	Neck	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Lotion Bottle 03	200 ml	PETG	28 mm	64.5 / 80.5 mm	33 g ±2	48.3 g	Enquire
Lotion Bottle 04	300 ml	PETG	28 mm	72.3 / 88.8 mm	45 g ±2	59 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

PETG Lotion Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 109 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 109PETG Lotion Bottles

5 formats · 200–400 ml

PETG Lotion Bottles: published dimensions
Format	Capacity	Material	Neck	Overall size	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Lotion Bottle 04	200 ml	PETG	24 mm	73 × 33.6 × 154.7 mm	112.5 / 130.1 mm	35 g ±2		Enquire
Lotion Bottle 05		PETG	24 mm	86.4 × 40.5 × 152.8 mm	110.9 / 128 mm	45 g ±2	58 g	Enquire
Lotion Bottle 06		PETG	24 mm	82.1 × 38 × 168.8 mm	126.8 / 144.5 mm	45 g ±2	58 g	Enquire
Lotion Bottle 07	350 ml	PETG	24 mm	86.5 × 40.3 × 175 mm	133.6 / 151 mm	60 g ±2	73 g	Enquire
Lotion Bottle 08	400 ml	PETG	24 mm		153.2 / 169.7 mm	65 g ±2	78 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

PETG Foam Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 110 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 110PETG Foam Bottles

3 formats · 250–500 ml

PETG Foam Bottles: published dimensions
Format	Capacity	Material	Neck	Overall size	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Foam Bottle 01	250 ml	PETG	43 mm		92.1 / 109 mm	44 g ±2	71 g	Enquire
Foam Bottle 02	400 ml	PETG	43 mm	74.4 × 54.7 × 191.4 mm	126.5 / 137.6 mm	56 g ±2	83 g	Enquire
Foam Bottle 03	500 ml	PETG	43 mm		136.1 / 153.6 mm	56 g ±2	93 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

PETG Foam Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 111 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 111PETG Foam Bottles

3 formats · 250–650 ml

PETG Foam Bottles: published dimensions
Format	Capacity	Material	Neck	Overall size	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Foam Bottle 01	250 ml	PETG	43 mm	67.1 × 144.1 mm	69.4 / 92 mm	38 g ±2	68.5 g	Enquire
Foam Bottle 02	450 ml	PETG	43 mm	67.1 × 193 mm	118.2 / 140.1 mm	58 g ±2		Enquire
Foam Bottle 03	650 ml	PETG	43 mm	68.1 × 228.6 mm	154.4 / 176.5 mm	75 g ±2	105.8 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

Foam Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 112 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 112Foam Bottles

1 format · 300 ml

Foam Bottles: published dimensions
Format	Capacity	Neck	Bottle weight	Enquiry
Foam Bottle 01	300 ml	43 mm	45 g ±2	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

PETG Lotion Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 113 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 113PETG Lotion Bottles

1 format · 300 ml

PETG Lotion Bottles: published dimensions
Format	Capacity	Material	Neck	Overall size	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Lotion Bottle 01	300 ml	PETG	24 mm	57.2 × 151.7 mm	109.6 / 127 mm	42 g ±2	55 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

PETG Lotion Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 114 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 114PETG Lotion Bottles

1 format · 300 ml

PETG Lotion Bottles: published dimensions
Format	Capacity	Material	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Lotion Bottle 02	300 ml	PETG	100 / 117.2 mm	45 g ±2	60 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

Squeeze Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 115 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 115Squeeze Bottles

2 formats · 30–50 ml

Squeeze Bottles: published dimensions
Format	Capacity	Neck	Overall size	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Squeeze Bottle 01	30 ml (brimful 38 ±2 ml)	24 mm	33 × 72.5 mm	51.5 / 55.4 mm	5 g ±0.5	112 g	Enquire
Squeeze Bottle 02	50 ml (brimful 57 ±2 ml)			78 / 92.6 mm	9 g ±0.5	13.9 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

Squeeze Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 116 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 116Squeeze Bottles

1 format · 30 ml

Squeeze Bottles: published dimensions
Format	Capacity	Neck	Overall size	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Squeeze Bottle 01	30 ml	14 mm	39.1 × 24.65 × 82.83 mm	58 / 76.2 mm	8 g ±0.5	12.5 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

HDPE Squeeze Bottles — the formats in this group, photographed together as published in the source catalogue. — Plate 117 of 169: the group as published, with the catalogue's own annotations kept as printed.

Plate 117HDPE Squeeze Bottles

2 formats · 30–60 ml

HDPE Squeeze Bottles: published dimensions
Format	Capacity	Material	Neck	Overall size	Height to shoulder / mouth	Bottle weight	Weight, filled	Enquiry
Squeeze Bottle 01	30 ml	HDPE / LDPE	19 mm	50.5 × 27 × 78.7 mm	57.53 / 71 mm		13.5 g	Enquire
Squeeze Bottle 02	60 ml	HDPE / LDPE	19 mm	50.5 × 27.4 × 108.3 mm	87.53 / 101 mm	12 g ±1	17.5 g	Enquire

Measured by hand on the sampled part, so a small tolerance applies. Re-confirmed against your formula before tooling.

Where These Come From

The capacity, neck, size and weight figures on this page are reprinted from the product catalogue of a manufacturing partner in our network; partner identities stay confidential to us. That catalogue prints its own caveat, and it applies here unchanged: a slight error in manual measurement is possible. None of these are held as stock and none is sold at a catalogue price — each is made to order against your own specification, with our quality control and project management on top, and every dimension is re-confirmed against your formula before tooling. The reference on each format goes straight into your enquiry, so we know precisely which one you are asking about.

Not sure how a first order works? See how we confirm a minimum, how sampling works, and the full procurement path.

Send Us the Format You Have in Mind

Tell us the format, the market and the finish. We will come back with what is achievable — material, decoration, sample timing and quantity, confirmed for your project.

Request a Quote Request a Sample