How We Work
We Are Not a Factory.
Here Is Why That Is Better for Your Project.
If you are comparing suppliers and you want a company that owns its own plant, this page will tell you in thirty seconds whether we are the right fit. We would rather you disqualify us now than discover it in a verification call.
The short version
COSMPACK is a China-based packaging partner for beauty brands. We do not own a manufacturing plant. We specify, source, tool, produce, decorate, inspect and ship through a vetted network of Chinese partner factories, and we carry commercial responsibility for the whole project.
You get one contact, one QC standard, one set of documents and one company to hold accountable. You do not get a captive plant.
What we control
- Specification and material selection — including PCR content and recyclability trade-offs
- Tooling: mold design, tooling review, T1/T2 samples and approval
- Supplier allocation — which factory runs your component, based on capability, capacity and price
- Production follow-up — on-site progress checks during production, not only at the end
- Quality: an agreed AQL plan under ANSI/ASQ Z1.4 at DPI, Final and Pre-Shipment, covering key components and final assembly
- Documentation: packing lists, inspection reports, material and compliance declarations
- Logistics: freight booking and export documentation through our forwarders
What we do not control
- The factory's internal scheduling. We manage it; we cannot own it.
- Factory lead time during peak season (Chinese New Year, Q4). We plan around it and tell you the real dates.
- Anything we have not been authorised to see. We do not have access to your competitor's orders, and we will not pretend to.
Who answers for which part
The useful question is not only who makes each component, but who answers for it. We agree this split per project; it is not a one-size-fits-all policy.
| Component / decision | Specified by | Made by | Inspected against | Claim owner | You approve at |
|---|---|---|---|---|---|
| Bottle or jar body | Us, with you | Partner factory | Key components under the agreed AQL plan; final assembly | Us | Drawing and T1/T2 sample |
| Closure, pump or dropper | Us, with you | Partner factory | Key components; fit and function; final assembly | Us | Fit sample and function test |
| Decoration (print, hot stamp, spray) | Us, with you | Partner factory or decorator | Key components; approved colour standard; final assembly | Us | Master sample / colour proof |
| Assembly | Us, with you | Partner factory | Final assembly under the agreed AQL plan | Us | Pre-production sample |
| Inspection and documents | Us | — | ANSI/ASQ Z1.4; caliper measurement | Us | Report before shipment |
| Freight and export documents | Us | Forwarder | Booking and document check | Us | Shipping documents |
On a phone, swipe the table sideways to see the inspection and approval columns.
The inspection plan names the key components it covers. A component outside the plan is stated as such before production. Tooling is quoted separately; on a new custom product, we agree the ownership term in the quotation so you see it before you approve the tool. Colour is approved on a physical sample and written into the production specification; if your project needs a measured tolerance, we agree the method before production.
This page describes how we work. The quotation and contract govern each project.
When your requirement changes
We plan for change, but we do not absorb it silently. You describe the change; we return the cost, tooling, inspection and timing impact in writing; you approve the delta before work moves. If the change is worse for you, we say so — including when the better answer is to keep the original specification. Our first job is to meet your requirement; our second is to keep a late change from becoming an unagreed cost.
Why a factory is not automatically better
| Question | Single factory | COSMPACK (multi-factory) |
|---|---|---|
| Can you supply the bottle, pump, cap and carton? | Usually one category only | Yes — across the network |
| What if your plant is full in your peak month? | Your order waits | We move it to another qualified plant |
| Who do I call when a batch fails? | The factory | Us — and we pursue the claim with the plant responsible |
| Will they tell you the true landed cost? | Theirs only | We compare plants and show you the delta |
Those are the visible symptoms. The failures underneath are more specific: each plant works to its own AQL and its own defect definitions; colour drifts between a bottle, a cap and a collar decorated at different plants; a component defect is declined by two plants at once; and a drawing that looks fine cannot be moulded or decorated at the target volume. We work as your sourcing and quality partner across those seams — one specification, one inspection plan, one commercial counterparty — and we tell you when a constraint is real before it becomes a cost. The inspection reports, including the batches we held back, are public.
How we choose a factory
Every plant in our network is reviewed before the first order, and re-reviewed annually. The review covers:
- Business license, export license, and legal entity verification
- Injection / glass / metal / printing capability against the component type
- Machine list and actual tonnage — we inspect it, we do not take the catalogue's word
- Real capacity against the current order book
- Decoration capability at the plant (screen print, hot stamp, spray, plating, UV)
- Historical defect rate and how they handle a claim
- Whether they will accept our inspection plan, in writing
Plants that will not accept our inspection standard do not enter the network.
How we make money
We are paid by our customers, not by the factories. That is deliberate.
We do not take undisclosed commissions from factories — a supplier paid by the factory has a reason to recommend the factory that pays best. When we quote, the product, the tooling and the freight are shown as separate lines so you can see what you are paying for.
Pricing is confirmed per project rather than published as a list: the container, the tooling and the decoration are what drive the number, and we explain which of them is driving yours. If you want to know how our margin is structured, ask — we will tell you.
How to verify us before you spend money
- Ask for the inspection reports from our recent orders. We publish them with the inspector's name — including the ones that flagged defects.
- Ask for the factory name on a live project and check it yourself. If a customer under NDA asks, we will disclose it under a one-way NDA.
- Ask us one question you already know the answer to. We would rather say "that is not our strength" than bluff.
What we will say no to
- Projects where we cannot meet your quality standard with any plant in the network
- Certification claims we do not hold. We do not have ISO 9001, ISO 14001, ISO 22716, GMP or SGS certification, and we will not display anyone else's.
- Copying a competitor's patented container design
- Orders where the honest answer is "this will not be profitable for you at this volume"
Start With a Sample, Not a Render
Test us on a small order first. Samples from existing tooling are faster and cheaper than a full custom prototype — and we will tell you honestly which one your project needs.