Liquid Twist Pen 01
- Capacity
- 4 ml
- Size
- Ø16.9 × 124.1 mm
- Material
- PP + POM/POK + Aluminum
- Tip options
- 36
Cosmetic Pens
Every pen format in a manufacturing partner’s catalogue — 104 models across five families: liquid twist, special twist, liquid click, auto-flow and solid. Every one is made to order: pick a family, and we engineer the material, the tip and the decoration to your brief.
| Families | Liquid twist · Special twist · Liquid click · Auto-flow · Solid |
| Capacity | 1 – 10 ml across the liquid families. Solid formats carry no capacity in the source. |
| Size | Ø6.63 – Ø30.0 mm, 81.3 – 153.48 mm long |
| Materials | PP, POM, POK, ABS, PC, PETG, aluminum and stainless steel |
| Tip options | Up to 36 tip options for a single pen, on the models where the source catalogue charts them — listed per model below |
| Decoration | Spray coating, silk-screen printing, hot stamping, plating, printing, and texture finishes |
| Order quantity | Confirmed per project — it depends on the format, the tooling and the decoration |
| Sampling | Available. Formats already in tooling sample fastest; a custom prototype follows design approval |
Nothing in the table above is specific to a beauty product. Every column describes geometry or material - capacity, body diameter, body length, mechanism family, charted tip count - and none of those values changes because of what goes inside the pen.
That is the part worth noticing if your product is not a cosmetic. A twist or click mechanism moves a fixed volume per actuation whatever the liquid is. A body of Ø17.23 x 136.35 mm is that size whether it holds a lip gloss or a gel. And 70 of the 104 models on this page are specified with no metal anywhere in the construction, which is a property of the material list below rather than of the application.
What we are not is a regulatory partner. We hold no pharmaceutical, medical-device or management-system certification, and we do not issue biocompatibility, extractables or leachables documentation. Whether a format suits a regulated product, and what testing that requires, follows from your formulation and your regulatory route - and those answers come from the material suppliers and the testing laboratories, not from a packaging supplier's own declaration. If that puts work on your side, it is work that was always yours; a container supplier who offers to close it for you is offering a document, not a result.
Thirty-seven formats, 1 ml to 10 ml, Ø11.85 – 19.95 mm.
Eleven formats, 1 ml to 10 ml, up to Ø30.0 mm across the body.
Eleven formats, 2.8 ml to 6 ml, Ø13.15 – 18.34 mm.
Ten formats, 3 ml, Ø13.18 – 26.08 mm.
Thirty-five formats, Ø6.63 – 22.69 mm.
The photographs and the capacity, size and material figures on this page come from the product catalogue of a manufacturing partner in our network. Partner identities stay confidential to us. We do not hold these as stock and we do not sell them at a catalogue price — each is made to order against your own specification, with our quality control and project management on top. The figures are the values the source publishes; capacity and dimensions are confirmed against your formula and fill weight before tooling. The reference on each pen goes straight into your enquiry, so we know precisely which one you are asking about.
Not sure how a first order works? See how we confirm a minimum, how sampling works, and the full procurement path.
Tell us the format, the market and the finish. We will come back with what is achievable — material, decoration, sample timing and quantity, confirmed for your project.